Facade and interior decking

Quality plastic tiles for walls - best price

Cena

Od
Do$

Coverage window film

ano
ne

woods

ano
ne

Water resistance

type decking

Our plastic wall or wall tiles are very strong, maintenance-free, fast and very easy to install. You can use these boards both outdoors and indoors - in your house or apartment. It will only use you and your imagination. If you do not know the advice, we will be happy to advise you on the choice of plastic boards.

Mounting clip for tiles Mounting clip for mounting plastic tiles.

Mounting clip for tiles

HOPA stock

2.85 $/bal without DPH: 2.35 $/bal

detail

Finishing flexible corner profile Lome #VALUE!

Finishing flexible corner profile Lome

HOPA stock

6.46 $/ks without DPH: 5.34 $/ks 2.39 $/m

detail

Floorboards with  film - walnut Decking with Renolite film. Floor boards coated with high quality window film. Suitable for mounting on surfaces exposed to sunlight. Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in balení.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Floorboards with film - walnut

HOPA stock

85.26 $/bal without DPH: 70.47 $/bal 28.42 $/m2

detail

Floorboards with film - golden oak Floor boards coated with high quality window film. Suitable for mounting on surfaces exposed to sunlight. Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in balení.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Floorboards with film - golden oak

HOPA stock

85.26 $/bal without DPH: 70.47 $/bal 28.42 $/m2

detail

Variable corner profile Connects plastic planks in different corners.

Variable corner profile

HOPA stock

5.73 $/ks without DPH: 4.74 $/ks 1.91 $/m

detail

connecting profile Connects plastic profiles on flat surfaces.

connecting profile

HOPA stock

5.49 $/ks without DPH: 4.54 $/ks 1.83 $/m

detail

A profile connecting round 202 #VALUE!

A profile connecting round 202

HOPA stock

9.88 $/ks without DPH: 8.17 $/ks 3.29 $/m

detail

HARD floorboards - White HARD floorboards with higher resistance. Stronger construction planks ensures longer life and material strength. Decking size: 10 x 300 x 0.9 cm (width x length x thickness) .Veľa colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design. light weight, easy and convenient cena.Rychlá instalace.Dobré vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

HARD floorboards - White

HOPA stock

28.67 $/bal without DPH: 23.69 $/bal 9.56 $/m2

detail

Floorboards - graphite Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in balení.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Floorboards - graphite

HOPA stock

30.37 $/bal without DPH: 25.10 $/bal 10.12 $/m2

detail

Plastová palubka - bílá, strukturovaná - II. jakost Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in balení.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Plastová palubka - bílá, strukturovaná - II. jakost

HOPA stock

15.74 $/bal without DPH: 13.00 $/bal 5.25 $/m2

detail

Floorboards - mahogany Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in balení.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Floorboards - mahogany

HOPA stock

30.37 $/bal without DPH: 25.10 $/bal 10.12 $/m2

detail

Floorboards - marble Floorboards dimensions: 300 x 10 x 0.9 cm (L x W x H). The pack of three square meters - 10 pieces in pack.Mnoho colors and a wide selection of finishing ch profiles for the perfect look trim .Minimální maintenance free surface úpravy.Jednoduchá, fast and dry montáž.Moderní design, light weight, convenient and easy to install cena.Rychlá .dobre vlastnosti.Dlouhá thermal durability and high resistance to frost and UV radiation. • Facing floorboards with a tongue and groove for easy and quick installation. • It is mainly used for lining ceilings, roof, gables and entire facades, but also in the interior. • The lining is also very suitable in dusty and humid areas. • The lining is easily combinable with insulation systems. • Thanks so. Chimney effect resolves problems with damp masonry Instructions for use of plastic laths: • installation of external cladding it in view of the fragility of the material is not recommended at temperatures of + 5 ° C or lower. There is a danger of damaging the material during assembly. • When installing the horizontal edge profiles on the bottom surfaces we recommend always be concealed in the bottom of the bottom of these profiles to drill drain holes so as to provide the best drainage of water through these profiles. • Dark tiles, for example. Dark wood is not suitable to use in places where they are exposed to direct sunlight, which due to the high emissivity heat deformation can be milked tk dark tiles. This damage can not be applied complaint. For other colors may be due to direct sunlight cause 15% discoloration tiles (this does not apply to the facing panels Renolite foil). • distortions tiles for reasons of high emissivity heat can be prevented by installing the mounting clips (free movement of blades) and ventilation profiles that should be used at the top and bottom for better ventilation of overheated air.

Floorboards - marble

HOPA stock

30.37 $/bal without DPH: 25.10 $/bal 10.12 $/m2

detail

Universal corner L profile RA 110 #VALUE!

Universal corner L profile RA 110

HOPA stock

4.76 $/ks without DPH: 3.93 $/ks 1.59 $/m

detail

A rounded outer corner 200 #VALUE!

A rounded outer corner 200

HOPA stock

9.88 $/ks without DPH: 8.17 $/ks 3.29 $/m

detail

A rounded inner corner 201 #VALUE!

A rounded inner corner 201

HOPA stock

9.88 $/ks without DPH: 8.17 $/ks 3.29 $/m

detail

benefits

Maintenance

The plastic decking is maintenance-free. Any dirt can be removed with a damp cloth.

benefits

High strength

The unique ribbing system ensures high strength of the new HOPA plastic decking. The warranty is 10 years.

benefits

Water and mould resistant

It can be used anywhere, i.e. even in dusty and damp areas.

benefits

Jednoduchá, rychlá a suchá montáž

The weight of one board is about 185g. The deck has a tongue-and-groove system = easy and quick installation